Apr 24 2012
New from Weld Overdose Tamiya TA-06 IFS Adjustment Plate to change the mounting position. Currently the Tamiya TA-06 platform is very popular in Japan, many have already switched from ‘Drift Spec’ chassis over to the TA06. The recent releases of option parts from Overdose should be evidence of the TA-06 popularity. The new IFS suspension …
Permanent link to this article: http://driftmission.com/weld-overdose-tamiya-ta06-ifs-adjustment-plate/
Apr 10 2012
Weld Overdose has announced a new RC drift body scheduled for release in May 2012. The Aristo or Lexus GS as it was known in North America; is one of the most sought after VIP drifters around, this 195mm body is no exception. Weld Overdose has a long history of releasing extremely good quality products. …
Permanent link to this article: http://driftmission.com/weld-overdose-toyota-aristo-jzs161-rc-drift/
Mar 16 2012
New optional Tamiya TA-06 components from Weld Overdose. Currently the Tamiya TA-06 platform is very popular in Japan, many have already switched from ‘Drift Spec’ chassis over to the TA06. The recent releases of option parts from Overdose should be evidence of the TA-06 popularity. The latest set of option parts for the TA-06 is …
Permanent link to this article: http://driftmission.com/weld-overdose-tamiya-ta06-ifs-option-parts/
Feb 08 2012
New Tamiya TA-06 option part from Weld Overdose, a rear damper stay. The new carbon rear shock tower/damper stay will be made of 3mm thick carbon with twice the mounting positions compared to stock damper stay. This is a useful option for RC Drift and Touring Car enthusiasts.
Permanent link to this article: http://driftmission.com/weld-overdose-tamiya-ta06-rear-shock-tower/
Feb 05 2012
Weld Overdose has just created a very exclusive limited edition settings board. The settings board or set-up board, will me milled from high quality aluminum for the most accurate and precise set-up board available. This settings board can be used for RC Drifters and Touring car enthusiasts alike. This board will be limited edition so …
Permanent link to this article: http://driftmission.com/weld-overdose-limited-edition-setting-board/
Jan 24 2012
Weld Overdose RC products now offers low friction ball bearings. These new ball bearings offer less rolling resistance and more durable operation.
Permanent link to this article: http://driftmission.com/weld-overdose-low-friction-ball-bearings/
Jan 19 2012
Weld Overdose RC products now has their entire universal drive-shafts line-up available. OD now offers spare parts to replace any excessively worn out parts, without having to replacing the entire drive shaft.
Permanent link to this article: http://driftmission.com/weld-overdose-universal-driveshaft-spare-parts/
Jan 17 2012
Weld Overdose RC products has release wide angle universal drive shafts for the RC-Art CE-RX Chassis. Made of high strength materials in a stylish Overdose fashion, these drive shaft will perform as good as they look. An essential upgrade for anyone looking to get more than 50° out of their CE-RX.
Permanent link to this article: http://driftmission.com/weld-overdose-ce-rx-universal-driveshafts/
Jan 08 2012
Now available from Weld Overdose for the Tamiya TA-06 chassis, a rigid rear axle. This new rigid rear axle replaces the oil filled gear differential for better drifting characteristics. If you are looking to turn a TA-06 into a RC Drift Spec chassis, this is the option part for you.
Permanent link to this article: http://driftmission.com/weld-overdose-tamiya-ta06-rigid-rear-axle/
Dec 29 2011
Weld Overdose has released another production run of the Overdose Tamiya VDF front bumper support. The new front bumper has been designed by Overdose for the best aesthetic appeal and style. The new front bumper also adds a small mount of weight to the front of the bumper. If you are an Overdose and Tamiya …
Permanent link to this article: http://driftmission.com/weld-overdose-tamiya-vdf-bumper-support/
Dec 16 2011
Weld Overdose has just released aluminum rear uprights for Tamiya based chassis. The new rear uprights feature overdose styling and also greater mounting positions for the upper suspension arms. The new aluminum rear uprights are made of high quality light weight aluminum and anodized in two Tamiya blue and gold colours.
Permanent link to this article: http://driftmission.com/overdose-rear-uprights-for-tamiya-chassis/
Dec 15 2011
Ever dreamed of modifying a HPI E-10 for counter steer? Weld Overdose has the solution for you, introducing counter-steer gears for the HPI E-10 chassis. The new countersteer gears will provide a generous 1.52 overdrive ratio. The CS kit includes an alloy rear rigid axle/spool axle for improved drifting performance. The drive cups are made …
Permanent link to this article: http://driftmission.com/weld-overdose-hpi-e10-countersteer-kit/
Download a copy of the DriftMission.com RC Drift Stickerbomb
Recent Comments