DriftMission.com - Your Home for RC Drift > The Garage > Setups for Drift > Hot Bodies Chassis Drift Setups > Hot Bodies TCX Hara Edition 1.25CS

Print this Page

Hot Bodies TCX Hara Edition 1.25CS

(Last Updated: 2011-01-13)

Countersteer Ratio: 1.25

This is the latest edition to the Hot Bodies touring car chassis line-up. This car was released in 2010 and has been a fierce competitor in the touring car circuit. As you may have noticed from the Chassis Build section that this specific HB TCX box was authographed by Atsushi Hara of Hot Bodies. This chassis has been CS modded for 1.25.

RC Drift Chassis Information

Make

 Hot Bodies

Model

 TCX

Track Surface

 Carpet

Tires

 HPI T-Drift Slicks

Motor and ESC

 Novak Ballistic 8.5T with Novak GTB 1st version

Servo

 Futaba

Chassis Settings
 

Front

Rear

Camber (Positive is out, Negative is in)

 -3 -3

Toe (Degrees) (Positive is out, Negative is in)

 0 -3

Caster (Degrees)

 Stock  

Kick-up (mm)

 0mm none

Sway Bar

 Sof Sof

Ride Height (mm)

 4.0mm 5.0mm

Damper Settings

Springs

 HPI Soft HPI Medium

Damper Oil

 30wt 30wt

Upper Damper Position (Lower # indicates inner most position)

 1 6

Lower Damper Position (Lower # indicates inner most position)

 2 2

Other (Weights, Mods, etc)

 Front Ball differential HB Solid Axle

Drivetrain

Belts

 Stock TCX Stock TCX

Front

 39T HB with ball diff

Front Center

 16T Center One-way

Rear Center

 20T HB TCX pulley

Rear

 39T HB with Spool

Spur

 115T 64DP

Pinion

 35T 64DP

 

 

Here is a video of the TCX running at Sheldons Hobbys

Thanks for looking!

 

Permanent link to this article: http://driftmission.com/the-garage/setups-for-drift/hot-bodies-chassis-setup/hot-bodies-tcx-hara-edition/