Max Speed Technology MST MS-01D Pro DriftMission.com Your Home for Countersteer RC Drift

MST MS-01D Pro

(Last Updated: 2011-10-25)

Countersteer Ratio: 1

The MST MS-01D Pro chassis kit is new to the market and we finally got our hands on one. First seen as the Spice RC, it turns out that MST is the original manufacturer and designer of this chassis. MST has done a great job bringing new innovative design to the RC drift chassis. With many unique designs, MST is bound to be a great impact on the RC community. We chose to go with the out of box setup of this chassis. The drive train is setup in a 50/50 fashion, equal drive ratio front and rear. The settings used for the initial test drive of the chassis are the recommendations right out of the book with the exception of the front camber. The rear camber was adjusted it so that it would wear evenly along the 3 degrees of camber included with the tire. Suspension mounts and castor angles are all stock. Maximum steering angle is restricted by a small additional piece on the lower front suspension arm, but it can easily be removed for more steering. All settings were measure with an analog caliper for best accuracy.

RC Drift Chassis Information
Make	Max Speed Technology
Model	MS-01D
Track Surface	Concrete
Tires	MST Med-soft
Motor and ESC	Hobbywing 35A esc with 12T (3300kV) brushless motor
Servo	Blue Bird BLS621

Chassis Settings
	Front	Rear
Camber (Positive is out, Negative is in)	-6	-4
Toe (Degrees) (Positive is out, Negative is in)	1	-1
Caster (Degrees)	4 degrees
Kick-up (mm)	0mm	none
Sway Bar
Ride Height (mm)	10.0m	10.0m
Damper Settings
Springs	MST Soft (Gold color)	MST Soft (Gold color)
Damper Oil	MST #300	MST #300
Upper Damper Position (Lower # indicates inner most position)	2	2
Lower Damper Position (Lower # indicates inner most position)	2	2
Other (Weights, Mods, etc)	Front One-way, MST Tires have 3 degrees of camber	Stock MST Delrin Spool
Drivetrain
Belts	228mmStock MST	Stock MST