Tamiya TA-03F Pro

(Last Updated: 2011-06-06)

Countersteer Ratio: 1

The 3rd generation Tamiya belt driven TA edition touring car, this one is the front motor edition. These chassis was one of the first used for RC drifting, one may even say the grandfather of drift chassis. The custom stealth ESC and motor wiring job is one of a kind and will not be found anywhere else. This is the cleanest TA-03F I have ever seen! This is a must see for any Tamiya fan or TA-03 lovers out there.

RC Drift Chassis Information
Make	Tamiya
Model	TA-03F
Track Surface	Asphalt/tarmac
Tires	Tamiya Wide Rubber
Motor and ESC	Novak Slydr 10.5 & Novak Slydr Esc
Servo	Futaba

Chassis Settings
	Front	Rear
Camber (Positive is out, Negative is in)	-6	-6
Toe (Degrees) (Positive is out, Negative is in)	0	-2
Caster (Degrees)	0 degrees
Kick-up (mm)	0mm	none
Sway Bar	Pro	no
Ride Height (mm)	3.5mm	3.5mm
Damper Settings
Springs	Tamiya Blue (Hard)	Tamiya Red (Soft)
Damper Oil	AE 30W	AE 30W
Upper Damper Position (Lower # indicates inner most position)	1	1
Lower Damper Position (Lower # indicates inner most position)	1	1
Other (Weights, Mods, etc)	10mm offset wheels	10mm offset wheels
Drivetrain
Belts	stock	stock