After 10 months of hard work @ RC Smoker in a little town in Perth, Western Australia. The Burnout Demon was designed and developed for the RC Drift Car market and now it’s finally available to RC Drift Car enthusiasts around the world. The Burnout Demon is not just another Modified E Cigarette smoker. It is designed to do one thing and do it well. That’s to produce a huge amount of smoke just like real Drift Cars. Stay tuned as we will be reviewing this in the coming weeks here on DriftMission.com and one lucky winner will be getting one for free!
The Burnout Demon produces so much smoke that you can see it billowing from the wheel arches even in full sunlight.
Take total control with the Burnout Demon Smoke Control Unit (SCU). It lets you set the Smoke ON/OFF position at any point in your throttle operation to give you total control. Easy to mount and very light weight at 77 grams. It also works well and won’t upset the balance for RWD Drift cars.
The Burnout Demon is compact @ 26H x 26W x 80L mm. This fits easily on any chassis sitting neatly under the body shell. Operating voltage of 7.2 to 8.4 volts so any 7.2V NIMH/NiCad or 2S Lipo Battery will give fantastic Smoke Production. We haven’t forgotten – we all like to match our chassis so we produce them in three colours: Oriental Red, High Gold & Vivid Blue. Kits come two ways with a Plug and Play Adapter to suit the power plugs you use or a DIY solder in power leads.
Ok, all that sounds great but what does it cost? Burnout Demon is $79.95 AUD.
They are a little more expensive than the other Chinese E Cigarette smoke units on the market but we all know you only get what you pay for. Purchase the best unit that really DOES WORK.
Here is the list of what is included with the Burnout Demon.
- 1 x Burnout Demon Smoke Generator (Three Colours – Oriental Red, Vivid Blue, High Gold)
- 1 x SCU (Fully adjustable Smoke Control Unit)
- 1 x (Option) Connection adaptor to suit XT60 / Deans / 7.2V Tamiya /4mm Bullet Connector
- 1 x Male to Male Receiver Lead to suit (JR / Hitec / Futaba/Orange/Turnigy)
- 1 x JST 20 AWG Silicone power lead 110mm (Option DIY Supplied)
- 1 x Centre Point Adjustment Screw Driver
- 1 x Burnout Demon Sticker Set
- 1 x Bottle RedX Smoker Fluid
- 1 x Filling 5ml Syringe
- 1 x 25mm x 5mm Heat Shrink (Option DIY Supplied)
- 2 x 200mm Cable ties
- 4 x 50mm Cable ties
- 1 x Full Installation Instruction
- 1 x Two Year Warranty
Every unit includes a full two year warranty.
Have Fun, Keep It Sideways & Smokin…