Eagle Racing R31 Suspension Set for Tamiya Chassis

Eagle Racing is releasing more option parts for Tamiya based chassis. If you own a Tamiya chassis and want to convert to the R31 suspension system, then now is your chance. Eagle recently released R31 suspension kits for the Tamiya TA-06, TB-03 and VDF V2 chassis. Now you can update your Tamiya chassis with these ready to assemble Eagle Racing R31 suspension arm kits. The R31 system has been know to be a more superior design than the traditional stock Tamiya design. The R31 system is just more capable! Worth checking out if you own a Tamiya mentioned above.
Eagle Racing R31 Suspension Arms Kit for Tamiya

  • Model Numbers: TA06-30 (for TA-06), TB03-20 (for TB-03), VDFV2-02 (for VDF V2)
  • FRP Suspension Arms
  • Front and rear FRP hubs
  • FRP C-hub
  • Alloy hinge pins
  • Eagle TSD universal driveshafts
  • Turnbuckles
  • Bearings for the hubs
  • Optional 0, 1, 2 degree toe-in hubs
  • Optional 8, 12, 16 degree castor angles
  • Misc fastening hardware, grub screws, king pins, etc

Approximate MSRP: ¥4800JPY
Source: Eagle Racing Japan

18 Comments on “Eagle Racing R31 Suspension Set for Tamiya Chassis”

  1. Street jam uses 3mm hinge pins, so this set isn’t tamiya specific at all. It can be used on street jam, tamiya or yokomo. Eagle racing’s suspension kit labeled for sj r31 is identical.

    1. Well that may be true, they put it in a kit and give you the proper length cvd’s because with a ta05 you need to use 51mm length. try and buy this kit for less than what they are offering it for through anyone else.

      1. FYI, Ta05 and street jam diffs are the same width, and interchangeable. All things considered, suspension geometry is identical. Eagle sells the same kit labeled for R31, so they cost the same.

  2. Street jam uses 3mm hinge pins, so this set isn’t tamiya specific at all. It can be used on street jam, tamiya or yokomo. Eagle racing’s suspension kit labeled for sj r31 is identical.

    1. Well that may be true, they put it in a kit and give you the proper length cvd’s because with a ta05 you need to use 51mm length. try and buy this kit for less than what they are offering it for through anyone else.

      1. FYI, Ta05 and street jam diffs are the same width, and interchangeable. All things considered, suspension geometry is identical. Eagle sells the same kit labeled for R31, so they cost the same.

Leave a Reply

Your email address will not be published. Required fields are marked *