The Overdose Vacula is a rear midship mounted chassis, very similar to the Tamiya TA-06. It is expected to come with a countersteer ratio of 1.3. This car has been uniquely designed by Weld Overdose for better suspension characteristics. Similar to new Yokomo Dampers they contain larger capacity with a longer stroke. This is a high-end Overdose chassis and made specifically for RC drifting. This is a cultivation of everything Overdose has learned from their previously designed option parts for various other chassis in the market. This chassis will be in very high demand, Overdose is currently taking pre-orders and rumors has it the 1st batch is completely sold out! Get yours while you still can!
Newly announced from Weld Overdose comes the Overdose Vacula RC Drift chassis! This has been talked about for the last few weeks after pictures showed up, this new chassis from Overdose will be available in Purple and a limited number are expected in Red. We are expecting it to become available in July or August 2013, and may sell out fast. Check your bank account, as it will have a MSRP around $800 USD.
Overdose Vacula Chassis
- Model Number: OD1200
- 1/10 scale RC Drift chassis
- Uniquely designed by Overdose
- Rear midship mounted motor
- 2 belt drive
- Longitudinal/in-line battery position
- Front ball differential
- Large bore dampers with longer stroke
- 1:1.3 CS Drive Ratio
- Available in Purple, limited RED edition
- Genuine Original Weld Technique Factory Co. Ltd.
- Available in Purple or Red anodized aluminium
Approximate MSRP: ¥90325JPY
This product is a chassis kit ONLY! Radio set, steering servo, speed controller, motor, battery, body, tires, wheels, spur gear, pinion gear NOT included
Source: Overdose Weld Technique Factory
Lol, why do people keep saying reverse DIB? I say non-IFS TA-06!
Must be the swing tray 😛
LOL how is it a non-ifs TA-06? this chassis is full belt driven while the TA-06 is half belt, half gear driven,
At least I’m not one of those people claiming this is a MST XXX-D clone! lol!!!
wonder if you can swap it around to run motor at the front
wierd its an overdose chassis but not very blinged out. its also funny to see a plastic part with the OD stamp. lol
Much to overpriced just for the name … nothing new about the chassis and overhyped … i stick to my yokomo dib and drb and mst
This is ADR chassis similar.
See this page – http://www.alex.ne.jp/rc/15thexj.htm
I think this very strange.
Where can I get polycarbonate tyres for carpet running, 26mm, for this car
Looks like a reversed yok dib with drb engine mount. Lol
Looks nice for sure but I’m at the point where too many options and setting is just too much crap. I’ve won comps hands down with a VDF. Way too over priced. I’d rather have my DRB than anything from OD.
Lol, why do people keep saying reverse DIB? I say non-IFS TA-06!
LOL how is it a non-ifs TA-06? this chassis is full belt driven while the TA-06 is half belt, half gear driven,
At least I’m not one of those people claiming this is a MST XXX-D clone! lol!!!
Must be the swing tray 😛
This is ADR chassis similar.
See this page – http://www.alex.ne.jp/rc/15thexj.htm
I think this very strange.
Where can I get polycarbonate tyres for carpet running, 26mm, for this car
wierd its an overdose chassis but not very blinged out. its also funny to see a plastic part with the OD stamp. lol
wonder if you can swap it around to run motor at the front
Much to overpriced just for the name … nothing new about the chassis and overhyped … i stick to my yokomo dib and drb and mst
Looks nice for sure but I’m at the point where too many options and setting is just too much crap. I’ve won comps hands down with a VDF. Way too over priced. I’d rather have my DRB than anything from OD.
Looks like a reversed yok dib with drb engine mount. Lol