Max Speed Technology FS-01D Chassis Build

MST FS-01D Chassis Build by Driftmission.com

MST FS-01D Chassis Build by Driftmission.comDriftmission.com presents the MST FS-01D VIP edition from Max Speed Technology. Conversion kits aside, this is one of the first complete front motor chassis kits available; the only other front motor chassis is the Tamiya TA-03F. This is a modern version of the a front motor layout chassis, fully equipped with silver surface graphite for maximum aesthetic appeal and performance. The new FS-01D chassis comes fully assembled directly from the MST factory. This is especially useful to ensure a certain level of quality is met for every chassis. This chassis is almost ready to drift out of the box, only a few simple steps and you are on your way.
Check out the full build of the MST FS-01D chassis kit.

Check out the MST FS-01D un-boxing for more details about the chassis.
MST FS-01D Chassis Build by Driftmission.comMST FS-01D Chassis Build by Driftmission.comMST FS-01D Chassis Build by Driftmission.com
Use the form below to order yours directly from Max Speed Technology
Your information will only be used for the purpose of fulfilling your order with Max Speed Technology. Click here to view our Privacy Policy.

    Your Name (required)
    Your Email (required)
    Country
    Message
    To use CAPTCHA, you need Really Simple CAPTCHA plugin installed.


    Source: Max Speed Technology

    24 Comments on “Max Speed Technology FS-01D Chassis Build”

    1. awesome, i have 1 on order… im kinda new to rc drifting but am hooked.. could anyone help me with a good motor/esc combo to suit this chassis??? ive read the electrics reviews on here, ive also been recomended a 6.5t brushless and a 120a esc, is this what im looking for??? any suggestions

      1.  It is not necessary to run that much power, we usually run between 8.5T to 13.5T and 60A esc’s.  6.5T might be a bit quick but you will have to be careful with gearing.  Depends on what your price range is for the motor and esc. Our review will be up soon for this chassis, we are running a Novak Havoc ESC and Novak 8.5T motor. 

    2. ok thanks…. i have been looking at the slydr combo from novak n also a combo from viper.. i honestly dont mind paying if its for quality and something that will last and perform… looking forward to reading this new reveiw… buy the way awesome site, luv it..

    3. Sorry for asking newbie question , as i am still new to drift , i would like to know if given the same motor , esc , servo , and the likes , which one drifts better (for stability and consistency) the front mount FS-01D or the Midship MS-01D ? Sorry for the trouble , also , i would like to ask that if i order using the form provided , does MST ship to Malaysia ?

      1. No problem, we were all newbie once :)Both are very good chassis!  My personal opinion is that the MS is more stable and consistent, midship is a very good design and popular in RC Drift.  The FS is a higher level chassis that requires more attention and tuning, and can be just as stable and consistent.
        Yes MST will ship to Malaysia 🙂

    4. Sorry for asking newbie question , as i am still new to drift , i would like to know if given the same motor , esc , servo , and the likes , which one drifts better (for stability and consistency) the front mount FS-01D or the Midship MS-01D ? Sorry for the trouble , also , i would like to ask that if i order using the form provided , does MST ship to Malaysia ?

      1. No problem, we were all newbie once :)Both are very good chassis!  My personal opinion is that the MS is more stable and consistent, midship is a very good design and popular in RC Drift.  The FS is a higher level chassis that requires more attention and tuning, and can be just as stable and consistent.
        Yes MST will ship to Malaysia 🙂

    5. awesome, i have 1 on order… im kinda new to rc drifting but am hooked.. could anyone help me with a good motor/esc combo to suit this chassis??? ive read the electrics reviews on here, ive also been recomended a 6.5t brushless and a 120a esc, is this what im looking for??? any suggestions

      1.  It is not necessary to run that much power, we usually run between 8.5T to 13.5T and 60A esc’s.  6.5T might be a bit quick but you will have to be careful with gearing.  Depends on what your price range is for the motor and esc. Our review will be up soon for this chassis, we are running a Novak Havoc ESC and Novak 8.5T motor. 

    6. ok thanks…. i have been looking at the slydr combo from novak n also a combo from viper.. i honestly dont mind paying if its for quality and something that will last and perform… looking forward to reading this new reveiw… buy the way awesome site, luv it..

    Leave a Reply

    Your email address will not be published. Required fields are marked *