The MST RMX EX GT is the latest evolution of the RMX line-up of RC Drift chassis. The RMX EX GT is redesigned with a focus on competition level performance, the changes have resulted in an enhanced control and improved performance.
It features a newly designed suspension system while incorporating a newly developed stiff spring set which significantly enhancing speed and providing more stable control for high-angle drifting. The RMX EX GT can be set up for both high and low centre-of-gravity to optimize drift performance on different track layouts and surfaces. The EX GT is optimized with a selection of premium optional parts to achieve a more precise driving experience. As always, MST offers a large variety of optional parts to further enhance the aesthetic and functionality of the chassis.
Key Features of the MST RMX 2.5 RS Chassis:
- Newly designed rear spur-gear-driving the gearbox is able to switch the drive mode for RMX and RRX
- Newly designed RMX 2.5 RS dedicated carbon deck 2.5mm
- New-designed carbon upper deck
- Newly designed aluminum shock absorber with adjustable length
- Front & rear lightweight carbon damper stay
- Full aluminum suspensionmount (front -2.0 / rear +0.5)
- RMX 2.5 RS dedicated carbon quick-release battery holder
- Equipped with MB rear suspension
- NS servo saver arm
- Two install methods of motor mount – upper or lower gravity deployment
- Two install methods of servo – vertical or lateral deployment
- The adjustable steering system for two-step Ackermann changes
- 6 degrees KPI steering upright, and -0.5 towing distance axle design
- New designed inside rods fulcrum mount at the front upper arm is adjustable for 10-step highness and both sides positions
- Standard ball differential
- Steel CVD axle of rear transmission system
- Standard realistic caliper and disc shape brake set











SPECIFICATIONS
SPECIFICATION : 1/10 Drift Car
DRIVE MODE : RWD
WHEELBASE : 257mm(adjustable +-3mm)
HEX TO HEX WIDTH : F178mm / R171mm
CASTER : Adjustable 6/ 8/ 10/ 12 degrees
CAMBER : Adjustable 0 to -12 degrees
Full ball bearings
Aluminum Hydraulic Damper Set







