The MST RMX EX GT is the latest evolution of the RMX line-up of RC Drift chassis. The RMX EX GT is redesigned with a focus on competition level performance, the changes have resulted in an enhanced control and improved performance.
It features a newly designed suspension system while incorporating a newly developed stiff spring set which significantly enhancing speed and providing more stable control for high-angle drifting. The RMX EX GT can be set up for both high and low centre-of-gravity to optimize drift performance on different track layouts and surfaces. The EX GT is optimized with a selection of premium optional parts to achieve a more precise driving experience. As always, MST offers a large variety of optional parts to further enhance the aesthetic and functionality of the chassis.
Key Features of the MST RMX EX GT Chassis:
- The newly designed ATK V2 Front steering block is used with a new Ackermann setting that provides aggressive and flexible steering at the beginning of the turn and can handle larger drifting angles in the later stages of the turn capable of stable driving during high-angle drifting.
- The new design THA adjustable short arms are used in the rear with long-type suspension arm mounts to increase rear roll and improve flipping speed and corner exit acceleration.
- Front aluminum suspension arm (-2) paired with the newly designed elongated aluminum adjustable rear arm (+11.5~+13)
- Can freely choose between preferred high/low center of gravity control modes
- Aggressive control with a high center of gravity mode
- Stable control with a low center of gravity mode
- Switchable MR and RR drive spur gear aluminum gearbox
- New gear differentials with #3000 silicone oil for optimal differential performance
- Aluminum 3-stage adjustable motor mount
- Lightweight design with a 2.5mm carbon chassis maintaining moderate rigidity
- 3.5mm dual carbon upper deck for reinforced chassis rigidity
- Aluminum upper deck front/rear connectors for enhanced chassis rigidity
- KMW front head mount reinforcement set
- Lightweight carbon front/rear damper stay
- TDA-RWD drift-specific aluminum shocks
- New design DK-RWD front/rear short spring set
- Lightweight quick-release battery mounting set
- New lightweight front bumper/rear handle
SPECIFICATIONS
RMX EX GT Competition-Level RWD Drift Car Kit
Wheelbase: 257mm (adjustable +-3mm)
Hex to Hex Width: F180mm / R172mm
Drive Mode: RWD
Caster: Adjustable 6/8/10/12 degrees
Camber: Adjustable 0 to -12 degrees
Full Ball Bearing
Aluminum Hydraulic Damper Set
Source: Max Speed Technology
